ENVI-Met Soil Plant Source - [source code]

Use this component to generate ENVI-Met inputs for "LB ENVI-Met Spaces". - Some 'plant3Did_' could not work properly. -

Inputs

• basePoint [Optional]

  Input a point here to move ENVI-Met grid. If no input is provided it will be origin point.

• soil [Default]

  Geometry that represent ENVI-Met soil. Geometry must be a Surface or Brep on xy plane.

• plant2D [Default]

  Geometry that represent ENVI-Met plant 2d. Geometry must be a Surface or Brep on xy plane.

• plant3D [Default]

  Geometry that represent ENVI-Met plant 3d. Geometry must be a Surface or Brep on xy plane.

• source [Default]

  Geometry that represent ENVI-Met plant 3d. Geometry must be a Surface or Brep on xy plane.

• soilId [Default]

  ENVI-Met profile id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. L0

• plantId [Default]

  ENVI-Met plant id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. XX

• plant3Did [Default]

  ENVI-Met plant3D id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. PI,.Pinus Pinea

• sourceId [Default]

  ENVI-Met source id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. FT

Outputs

• readMe!

  ...

• envimetPlants

  Connect this output to "ENVI-Met Spaces" in order to add plants to ENVI-Met model.

• envimetSoils

  Connect this output to "ENVI-Met Spaces" in order to add soils to ENVI-Met model.

• envimetSources

  Connect this output to "ENVI-Met Spaces" in order to add sources to ENVI-Met model.

Check Hydra Example Files for ENVI-Met Soil Plant Source