ENVI-Met Soil Plant Source - [source code]

Use this component to generate ENVI-Met inputs for "LB ENVI-Met Spaces". - Some 'plant3Did_' could not work properly. -

Inputs

  • basePoint [Optional]
    Input a point here to move ENVI-Met grid. If no input is provided it will be origin point.
  • soil [Default]
    Geometry that represent ENVI-Met soil. Geometry must be a Surface or Brep on xy plane.
  • plant2D [Default]
    Geometry that represent ENVI-Met plant 2d. Geometry must be a Surface or Brep on xy plane.
  • plant3D [Default]
    Geometry that represent ENVI-Met plant 3d. Geometry must be a Surface or Brep on xy plane.
  • source [Default]
    Geometry that represent ENVI-Met plant 3d. Geometry must be a Surface or Brep on xy plane.
  • soilId [Default]
    ENVI-Met profile id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. L0
  • plantId [Default]
    ENVI-Met plant id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. XX
  • plant3Did [Default]
    ENVI-Met plant3D id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. PI,.Pinus Pinea
  • sourceId [Default]
    ENVI-Met source id. You can use "id outputs" which comes from "LB ENVI-Met Read Library". - E.g. FT

Outputs

  • readMe!
    ...
  • envimetPlants
    Connect this output to "ENVI-Met Spaces" in order to add plants to ENVI-Met model.
  • envimetSoils
    Connect this output to "ENVI-Met Spaces" in order to add soils to ENVI-Met model.
  • envimetSources
    Connect this output to "ENVI-Met Spaces" in order to add sources to ENVI-Met model.

Check Hydra Example Files for ENVI-Met Soil Plant Source

results matching ""

    No results matching ""