Separate By Normal - [source code]

Select surfaces based on orientation. -

Inputs

  • geometry [Required]
    Geometry for which facades will be selected. Geometry must be either a Brep, a Mesh or a list of Breps or Meshes.
  • maxUpDecAngle [Default]
    Maximum normal declination angle from ZAxis that should be still considerd up
  • maxDownDecAngle [Default]
    Maximum normal declination angle from ZAxis that should be still considerd down
  • orientation [Default]
    A number between 0 and 8 for desired orientation. 0 = North, 1 = NE, 2 = East, ... 7 = NW, 8 = Roof. Default is South.
  • plusDeg [Default]
    Angle in degrees for deviation from orientation. Default = 23. For selecting all vertical orientations give 359 for this input and 0 for the _minusDeg (or viceversa)
  • minusDeg [Default]
    Angle in degrees for deviation from orientation. Default = 23. For selecting all vertical orientations give 359 for this input and 0 for the _plusDeg (or viceversa)

Outputs

  • readMe!
    ...
  • selFaces
    Selected faces/surfaces

Check Hydra Example Files for Separate By Normal

results matching ""

    No results matching ""